Public Lumber

Waterlox Original Sealer/Finish GALLON

Use on interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames, fly fishing rods, gun stocks, and various woodworking projects. Coverage: For hardwood species we recommend 3 coats of Waterlox Original Sealer/Finish. For softwood species such as pine, fir or cherry, apply 4 coats of the Waterlox Original Sealer/Finish. For best results, apply all coats liberally at approximately 500 square feet per gallon per coat. No thinning necessary. Clean application tools immediately with mineral spirits or turpentine. Exceptional adhesion to oily, dense, exotic woods like teak, rosewood (other than Cocobolo), and Ipe. Use on porous interior surfaces such as slate, brick, stone, tile, linoleum or cement to seal and prevent chalking and dusting*. For exterior projects as a sealer only, use 1-2 coats to prime, followed by 2 coats of Marine Finish. Same product as Waterlox Original Marine Sealer. Apply all intended coats to a small, inconspicuous area or a scrap piece of wood from the project and allow to dry prior to applying to the entire surface. Final color effect is always influenced by the grain, texture, porosity, species of wood, and by method of application.
You can earn 60 PLC REWARDS™ on this product!
If you live in any of the following states, you must choose the VOC compliant Waterlox listed below: AZ, CA, SCAQMD-South Coast Air Quality Management District, CT, DE, D.C., IL, ME, MD, MA, NH, NJ, NY, OH, PA, RI, VA:

Add to the cart
Save to my Wish List Tell a friend
Waterlox Original Sealer/Finish GALLON
View a larger version of this image
Waterlox Original Sealer/Finish GALLON

Previous Item   Next Item

Recent ProjectsPrivacy PolicyContact UsGlossary of TermsSite MapENewsletter SignUp
InternationalDoor Waterlox Sikkens Baldwin Yarema TrueValue Hardwoods WestSystem Guardian Franklin